Table of Contents
Advertisement
Stop the machine, and remove plug from the socket.
Make sure that all moving parts have come to a complete
stop
- whenever you leave the machine,
- before clearing blockages or unclogging chute,
- before checking, cleaning or working on the machine.
Do not tilt the machine while the power source is
running.
1.2.3- Before maintenance and storage
- When the machine is stopped for servicing, inspection, or
storage, or to change an accessory, shut off the power
source, disconnect the machine from the supply and make
sure that all moving parts are come to a complete stop.
Allow the machine to cool before making any inspections,
adjustments, etc. Maintain the machine with care and
keep it clean.
Always allow the machine to cool before storing.
When servicing the shredding means be aware that, even
though the power source is switched off due to the
interlock feature of the guard, the shredding means can
still be moved.
Never attempt to override the interlocked feature of the
guard.
- Keep all nuts, bolts and screws tight to be sure the
appliance is in safe working condition.
- Check the debris collection box frequently for signs of
wear and/or deterioration.
- Replace any worn or damaged parts.
- Make sure to use only genuine/original replacement
parts and accessories.
11
Advertisement
Table of Contents
