Related Manuals for Feider Machines FBVES2800-UK
Summary of Contents for Feider Machines FBVES2800-UK
- Page 1 ORIGINAL INSTRUCTIONS SHREDDER FBVES2800-UK USER GUIDE CAUTION: Read the instructions before using this machine.
-
Page 2: Table Of Contents
WARNING: Read thoroughly the instruction manual before use CONTENET SAFETY INSTRUCTIONS EXPLANATION OF SYMBOLS PARTS LIST CHARACTERISTICS GETTING STARTED OPERATION MAINTENANCE AND STORAGE DECLARATION OF CONFORMITY WARRANTY PRODUCT FAILURE WARRANTY EXCLUSIONS... -
Page 3: Safety Instructions
1. SAFETY INSTRUCTIONS Before using this product, carefully read and understand all the safety recommendations and instructions for safe operation. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Keep this manual handy so that you may refer to it later whenever any questions arise. - Page 4 1. Never operate this product when you are fatigued, ill, or upset, or under the influence of medication that may make you drowsy, or if you are under the influence of alcohol or drugs. Keep in mind, that the operator or user is responsible for accidents or hazards occurring to other people or their property.
- Page 5 4. Never start working until you have a clear work area, and secure footing, 5. Keep all parts of your body away from the feeding opening when the engine is running. 6. Before you start the product, make sure the product is properly assembled and that insertion chamber is not obstructed.
- Page 6 It will do the job better and safer at the rate speed for which it is intended. The product will do a better and safer job if it is used only for the purposes it was designed for. 13.4. Remove adjusting keys and wrenches Form the habit of checking to see that keys and adjusting wrenches are removed from the machine before operating it.
- Page 7 1.2.1- Initial preparation before operation - When you operate the machine, always wear full-length trousers, as well as sturdy, closed footwear that provide good support. Do NOT operate the machine wearing shorts, when barefoot or wearing open sandals! - Do not wear loose clothing or jewellery that can be drawn into the inlet.
- Page 8 Any damaged or defective components should be repaired immediately by a qualified technician. Never attempt to use an incomplete, not fully assembled or modified machine. - Under no circumstances or if safety equipment such as collection box is not installed, before using, always visually inspect to see, that the shredding means, shredding means bolts and other fasteners are secure, the housing is undamaged and that guards and screens...
- Page 9 POWER SOURCE. - If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. - Do not carry the appliance by the cable. Never use the power cord as a handle to lift or carry the device. - Always disconnect the product from the mains supply in the following circumstances: .
- Page 10 - Do not assume of your knowledge of the machine. Remember that a split second of negligence is sufficient to cause serious damage. Be aware of your surroundings and stay alert for potential hazards that you may not hear while operating the product. - Keep a safe distance from the ejection zone when working with the tool.
- Page 11 Stop the machine, and remove plug from the socket. Make sure that all moving parts have come to a complete stop - whenever you leave the machine, - before clearing blockages or unclogging chute, - before checking, cleaning or working on the machine. Do not tilt the machine while the power source is running.
- Page 12 - For reasons of safety, any worn or damaged component should be replaced or repaired immediately by a qualified technician. - When not in use, store the machine only in a dry place that is inaccessible to children. 1.2.4- Before starting the product - Only operate the product after completely assembling it.
-
Page 13: Explanation Of Symbols
2. EXPLANATION OF SYMBOLS Do not expose to weather conditions (ex.: rain, snow …) or to moisture. Do not use nor leave outdoor during weather conditions (e.g. rain, snow…) Do not use in the rain or leave outdoors while it is raining. Caution! Risk of injury and/or damage and/or deterioration of product in case on non-compliance to safety requirements. -
Page 14: Parts List
3. PARTS LIST 1- Push Stick 2- Feeding opening (feeding chamber) 3- Safety switch 4- Forward / Reverse mode switch 5- ON/OFF switch 6- Power cord anchoring device 7- Power cord & plug 8- Sliding rail 9- Lock button 10- Collection box 11- Support foot 12- Tubes (legs support tubes) 13- Wheel... -
Page 15: Getting Started
5. GETTING STARTED 4.1- Unpacking - Remove product from its packaging. - Check that tool and accessories are not missing or damaged. - If you find anything part missing or damaged, do not operate the tool until the part has been replaced or the fault has been rectified. Failure to do so could result in serious personal injury. -
Page 16: Operation
4.3.3- Collection box (Fig.4) To insert the collection box: Press down the lock button (A). Then insert the collection box into the sliding rails (8). Press the lock button (A) upward. To remove the collection box: Press down the lock button (A). Then slide the collection box out of the undercarriage. - Page 17 -- Keep proper balance and footing at all times. Do not over reach. Never stand at a higher level than the base of the machine, when feeding material into it. -- Always keep your fingers and hands away from the feeding chamber. Use the push stick to push in the material.
-
Page 18: Maintenance And Storage
5.2.5- Replacing the counter plate 1. Open the back cover by loosening the 4 Screws (A). 2. Take out the counter plate (B) and replace with a new one. 3. Put back the back cover and tighten the 4 screws. 7. -
Page 19: Declaration Of Conformity
BUILDER SAS ZI, 32 rue Aristide Bergè s – 31270 Cugnaux - France Declares that the machinery designated below: Silent shredder FBVES2800-UK Serial number: 20210734420-20210734669 Complies with the provisions of the Directive “machinery” 2006/42/EC and national laws transposing it: Also complies with the following European directives:... -
Page 20: Warranty
9. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identifed as defective by the designated distributor. -
Page 21: Product Failure
10. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 22: Warranty Exclusions
11. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 23 NOTES...
- Page 24 BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France Made in PRC 2021...