Feider Machines FBVES2800-UK User Manual page 12

- For reasons of safety, any worn or damaged component
should be replaced or repaired immediately by a qualified
technician.
- When not in use, store the machine only in a dry place
that is inaccessible to children.
1.2.4- Before starting the product
- Only operate the product after completely assembling it.
Do NOT operate product if it is not fully and properly
assembled!
- Before each use, check the machine for any signs of
damage.
- Prior to each use, check the power cord for signs of
damage. Under no circumstances should the power cord
be used if it shows any signs of damage.
- Ensure that the machine is only connected to
conventional sockets with a 230-240V alternating current
supply. Only use extension cables if they are really
necessary. The use of extension cables may cause a
drop in voltage, which will result in the machine not
performing to its peak or the motor overheating.
- The machine can be plugged into any 230-240 volt AC
outlet with 10 amps of fuse protection. The electrical
outlet is to be protected by an earth leakage circuit
breaker (ELCB) with a max triggering current of 30mA (i.e.
the appliance should be supplied via a Residual Current
Device (RCD) with a tripping current of not more than
30mA).
12