Table of Contents
Advertisement
4. Never start working until you have a clear work area,
and secure footing,
5. Keep all parts of your body away from the feeding
opening when the engine is running.
6. Before you start the product, make sure the product
is properly assembled and that insertion chamber is
not obstructed.
7.
All
maintenance listed in the Instructions Manual,
should be performed by competent service
personnel.
8. Always switch off the engine before carrying any
intervention.
9. Do NOT expose to and do not use during bad
weather conditions: never work in bad weather
(e.g. rain, storm, snow, high wind ...), never work
when visibility is poor or in very high or low
temperatures. Never leave product outdoors
under the rain.
10. Keep the handles dry, clean and free of grease, oil
or fuel.
11. Operate the product only in outdoors or in well
ventilated areas.
12. Do not operate the product on slopes or any other
unstable location.
13.1. Become familiar with the controls and the proper
use of the equipment.
13.2. Store idle machine. When not in use, product
should be stored in a dry, locked up place, out of reach
of children.
13.3. Do not force the tool.
product
service,
other
5
than
the
Advertisement
Table of Contents
