Feider Machines FBVES2800-UK User Manual page 10

- Do not assume of your knowledge of the machine.
Remember that a split second of negligence is sufficient
to cause serious damage. Be aware of your surroundings
and stay alert for potential hazards that you may not hear
while operating the product.
- Keep a safe distance from the ejection zone when
working with the tool.
- Be especially careful that material contains no metal
parts, stones, bottles, cans or other foreign objects before
inserting into the tool.
- If the cutting mechanism strikes any foreign objects or if
the machine should start making any unusual noise or
vibration, immediately shut off the power source and
allow the machine to stop. Disconnect the machine from
the supply and take the following steps before restarting
and operating the machine:
i) inspect for damage;
ii) replace or repair any damaged parts;
iii) check for and tighten any loose parts.
- If the machine becomes clogged, shut-off the power
source and disconnect the machine from supply before
cleaning debris.
Never operate the machine with defective guards or
shields, or without safety devices, for example debris
collector in place.
Keep the power source clean of debris and other
accumulations to prevent damage to the power source
or possible fire.
Do not transport this machine while the power source is
running.
10