Bluetooth Wireless Communication - Permobil SmartDrive MX2+ User Manual

WARNINGS:
- Do not operate hand-held transceivers (transmitters-receivers), such as citizens band (CB) radios, or turn on personal
communication devices, such as cellular phones, while the power assist is ON.
- Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to them.
- If unintended movement occurs, turn the power assist OFF as soon as it is safe.
- Be aware that adding accessories or components to your wheelchair may make it more susceptible to EMI [Note: There
is no easy way to evaluate their effect on the overall immunity of the device].
- Report all incidents of unintended movement to Customer Support, and note whether there is a source of EMI nearby.
USA / Canada: This device complies with Part 15 of the FCC rules . Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference, including interference that may
cause undesired operation . Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment .

Bluetooth Wireless Communication

Bluetooth wireless communication [2 .4 GHz frequency band] is used by the PushTracker / E3 to communicate to the
SmartDrive when to activate / deactivate the power assist, send and receive signals from a smartphone, etc . The
PushTracker / E3 must be within 25 ft (8 meters) of the SmartDrive / smartphone to connect and communicate . The maximum
output power of this technology is 10 mW, and the operation of this device in close proximity to other wireless devices [i .e .
electromagnetic security systems, Bluetooth headsets, etc . ] could cause the device to lose connection . Power assist is always
deactivated whenever the motor is driving and there is a loss of connection; the SmartDrive will beep and PushTracker / E3 will
also give indication when this happens . Worst case coexistence testing was performed on the device to ensure its safety and
effectiveness . Please contact Customer Support immediately for troubleshooting if continuous connection issues are
experienced with the device .
EN - SmartDrive MX2+ User's Manual 6