Smartdrive Battery Charging; Traveling And Shipping - Permobil SmartDrive MX2+ User Manual

WARNINGS:
- Only use the provided charger to recharge the SmartDrive. Other chargers may damage your unit, or cause a fire. Also,
always power off and never attempt to use the SmartDrive while charging.
- The battery charger is to be used indoors and in dry locations. Use an easily accessible outlet that is close to the
SmartDrive that is to be charged.
- Do not use or attempt to repair a damaged / defective charger. Contact Customer Support if a charger is damaged and
do not dispose of in your household garbage.
- The charging transformer box is intended to be laid flat during charging.
- Only use the power supply cord provided with the charger. The charger is capable of operating at different voltages
without adjustment.

SmartDrive Battery Charging

To charge the SmartDrive, plug the battery charger cable into a wall outlet, at which point the green LED on the charger box will
illuminate . Connect the magnetic charger connector to the powered off SmartDrive magnetic receptacle [moving the rubber
plug to the side] . The magnets in the connectors will only allow the plug to connect in one direction . Once the unit is connected
and charging, the LED on the charger will turn red . When the LED on the charger turns back to green, the SmartDrive is fully
charged . Remove the connector from the SmartDrive and replace the rubber cap to protect the receptacle on the SmartDrive .
The estimated charge time for a full recharge of the SmartDrive battery is approximately 3 hours .
See the separate PushTracker/ E3 User's Manual provided for its charging instructions .
WARNINGS:
Always store and charge the SmartDrive and PushTracker / E3 in a cool, dry area. Hot and damp environments can
-
damage or short the unit, requiring a costly replacement.
Make sure the charging receptacles are completely dry before plugging in the charger, for this can cause a spark or
-
short.
Also, never attempt to use the PushTracker / E3 while charging.
-
Do not throw away the SmartDrive or PushTracker / E3. Please properly dispose of each by recycling
at the end of its life or send it back to Permobil.

Traveling and Shipping

Because the SmartDrive houses a Lithium-Ion battery, special considerations have to be taken when traveling on an airplane .
The SmartDrive must be carried onto your plane and should be stored in the overhead bin . It is recommended that advanced
arrangements be made with each airline operator and approval received prior to departure date . A "SmartDrive Airline
Passenger / IATA Certificate" can be downloaded from www .permobil .com or provided upon request .
Use the provided foam stand for the SmartDrive to prevent movement and damage when transporting in a car . If riding in a cab,
it is recommended to have the driver hand you the SmartDrive so that it doesn't get damaged from movement when placed in
the trunk .
Also, special considerations need to be taken when shipping the SmartDrive due to the battery . Contact the shipping company
being used for instructions on how to correctly package and label prior to shipping . Be sure to provide plenty of padding /
protection for the SmartDrive to prevent damage during shipment .
EN - SmartDrive MX2+ User's Manual 15