Table of Contents
Advertisement
-
Just a slight loosening of the screw allows the saw chain tension to be adjusted. After adjusting,
retighten the screw firmly.
5. OPERATION
5.1 LUBRICATION
-
Saw chain is automatically lubricated when the tool is in operation. Check the amount of
remaining oil in the oil tank periodically.
-
Check the amount of remaining oil in the oil tank through the oil inspection window.
-
To refill the tank, remove the cap from the oil tank opening. The oil tank capacity is 120 ml.
-
After refilling the tank, always screw the provided oil tank cap on the chain saw.
Oil tank cap
Oil tank opening
WARNING!
•
When filling the chain saw with chain oil for the first time,or refilling the tank after it has
been completely emptied, add oil up to the bottom edge of the filler neck. The oil delivery
may otherwise beimpaired.
•
Never use oil including dust and particles or volatile oil.
•
When pruning trees, use botanical oil. Mineral oil may harm trees.
•
Never force the chain saw when pruning trees.
•
Before cutting out, make sure that the provided oil tank cap is screwed in place.
-
Hold the chain saw away from the tree. Start it and wait until lubrication on saw chain is
adequate.
Oil inspection window
16
Advertisement
Table of Contents
