Table of Contents
Advertisement
2. TECHNICAL DATA
The vibration value does not exceed 2,5 m/s²
Information
-
The declared noise emission value(s) have been measured in accordance with a standard test method
and may be used for comparing one tool with another;
-
The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
Warning
-
The noise emissions during actual use of the power tool can differ from the declared values
depending on the ways in which the tool is used especially what kind of workpiece is processed;
-
Need to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is running idle in addition to the trigger
time).
CAUTION: Read the instructions before using the machine!
Model
Mains voltage/ frequency
Power
Speed
Type
Blade size
Tilting swing arm
Swivel base
Sound pressure level LpA
Sound power level LwA
Uncertainty K:
Max. Cutting depth at ：
Saw width at 90°
Saw width at 45°
Saw width at 2 x 45° right
(double mitre cut)
Saw width at 2 x 45° left
(double mitre cut)
Table Tilting Range：
Saw Body Tilting：
Ø305 x Ø 30 x 40TX2.8 mm
9
HSO20305-A
220-240 V˜ 50 Hz
S1 1800W
S6 40% 2000W
3800/min
Single Phase
45° G/D
45° G/D
95dB(A)
108dB(A)
3 dB(A)
330 x 105 mm
230 x 60 mm
230 x 33 mm
230 x 60 mm
Left45° - Right45°
45° - 45°
Advertisement
Table of Contents
