Carrying The Projector - NEC GT950 User Manual

Carrying the Projector

Always carry your projector by the handle. Ensure that the power cable
and any other cables connecting to video sources are disconnected
before moving the projector.
When moving the projector or when it is not in use, cover the lens with
the lens hood cap.
The lens mechanism consists of precision parts. Be sure to mount the
included lens protection spacers to the lens unit when shipping or
moving the GT950.
1. Returning the Lens Shift to Center
If the lens position is not centered, it should be moved.
Move the lens to the center by going to "Projector Options" → "Lens",
then "Zero Position" of the menu. (See Page E-47.)
* To use the remote control for this, press the SHIFT button to bring
up the Lens Shift display, then move the lens to center with the SE-
LECT LM
buttons. Press the CANCEL button to close the dis-
play. (See Page E-29.)
2. Insert the Supplied Lens Protection Spacer Above and Below
the Lens
If the lens is not in the center position, the lens protection spacer
might not enter or excessive force could be applied to the lens mecha-
nism.
Be certain to insert the upper and lower portions all the way to the
back.
3. Attach the Supplied Lens Hood Cap
4. Extend the Carrying Handle
Grasp the carrying handle to move the projector.
Lens protection spacer
E – 9
Lens hood cap
Carrying handle