Installation; Setting Up Your Projector; Selecting A Location; Distance Chart - NEC GT950 User Manual

2. INSTALLATION

This section describes how to set up your GT950 projector and how to
connect video and audio sources.

Setting up Your Projector

Your GT950 Projector is simple to set up and use. But before you get
started, you must first:
1. Determine the image size.
2. Set up a screen or select a non-glossy white wall onto which you
can project your image.
3. Connect the supplied power cable.
4. Set up the projector.
5. Connect a PC, VCR, DVD player, or other equipment.
6. Make setting or adjustments on the projector.

Distance Chart

Ceiling Installation

Standard Lens (H 2.0) – (H 2.4)
174.9 mm (7")
E – 18

Selecting a Location

The further your projector is from the screen or wall, the larger the
image. The minimum size the image can be is approximately 25" (0.64
m) measured diagonally when the projector is roughly 3.9 feet (1.2 m)
from the wall or screen. The largest the image can be is 300" (7.6 m)
when the projector is about 39.4 feet (12.0 m) from the wall or screen.
Long Zoom Lens (H 3.4) – (H 5.1)
1.0V
0.85V