About Startup Screen - NEC GT950 User Manual

To turn off the projector:
First press the Power (ON/STANDBY) button on the projector cabinet or the POWER OFF button on the remote control for a minimum of two
seconds. The power indicator will glow orange. After the projector turns off, the cooling fans keep operating for 2 minutes.
NOTE: Do not disconnect the power cable during this time.
Then, unplug the power cable. The power indicator will go out.
Status of Indicators: OFF
OFF
POWER

About Startup Screen

(Menu Language Select screen)
When you first turn on the projector, you will get the Startup screen.
This screen gives you the opportunity to select one of the seven menu languages: English, German, French, Italian, Spanish,Swedish and Japa-
nese.
To select a menu language, follow these steps:
1. Use the Select L or M button to select one of the seven languages for the menu.
SELECT
2. Press the Enter button to execute the selection.
SELECT
3. The Basic/Custom menu will be displayed in the language you have selected.
SELECT
To close the menu, press the Cancel button.
After this has been done, you can proceed to the advanced menu operation.
If you want, you can select the menu language later. See "Language" on page E-42.
Fan running
ON
STATUS
Flashing green
POWER
light
Stand by
STATUS
Steady orange
POWER
light
E – 28
OFF ON
POWER
VIDEO S-VIDEO RGB1 RGB2
AUTO ADJ. LASER
SELECT
PJ
FOCUS ZOOM SHIFT
HELP POINTER PC CARD
SLIDE
KEYSTONE MAGNIFY
FREEZE VOLUME
FOLDER
PIC-MUTE SLIDE
LIST