White Balance; Projector Options; Sleep Timer; Menu - NEC GT950 User Manual

Nec gt950: users manual
Hide thumbs Also See for GT950:
Table of Contents

Advertisement

White Balance

This allows you to adjust the white balance. Brightness for each color
(RGB)is used to adjust the black level of the screen;
Contrast for each color (RGB)to adjust the white level of the screen.
First use the L or M buttons to select R, G, or B for the brightness and
the contrast. Next use the
or

Projector Options

Sleep Timer

1. Select your desired time between 30 minutes and 2 hours in 30
minute increments.
2. Select Set and press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
NOTE:
• To cancel the preset time, set "Off" for the preset time or turn off the power.
• When the remaining time reaches 3 minutes before the projector is turned
off, the "Projector will turn off in 3 minutes" message will be displayed on
the bottom of the screen.
buttons to adjust the level.

Menu

Allows you to set preferences for the on-screen menu.
Press "OK" to save your changes for all the features of page 1 and
page 2.
[Page 1]

Menu Mode:

This feature allows you to select two menu modes: Advanced Menu
and Basic/Custom Menu.
* When a passcode is set for your projector, changing the menu from Basic
to Advanced will display the Passcode input screen. See page E-48 for
more information.
Advanced Menu .......... This is the menu that contains all the available menus
Basic/Custom Menu .... This is the menu that you can customize using the
The factory default Basic/Custom menu includes:
Source Select (RGB, Video, S-Video, DVI (DIGITAL/ANALOG) and
PC Card Viewer), Picture, Volume, Image Options (Keystone, Lamp
Mode and Factory Default), Projector Options (Menu), Tools (Cap-
ture, PC Card Files and ChalkBoad) and Help (Contents and Infor-
mation). See page E-33 for instructions about how to customize the
Basic/Custom Menu.

Language:

You can choose one of seven languages for on-screen instructions.
The options are: English, German, French, Italian, Spanish, Swed-
ish and Japanese.

Projector Pointer:

This enables you to select from eight different Pointer icons for the
"Pointer" button on your remote control.
After moving your Pointer icon to the area you want on the screen,
press the Magnify button on the remote control to enlarge the se-
lected area on the screen. See page E-32 for more details.
NOTE: There may be cases where the Pointer function is not available (ex. a
non-interlace signal at 15kHz such as video game.)
E – 42
and commands.
Basic/Custom Menu Edit to fit your needs.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lcdgt950

Table of Contents