Moon Valley M-1800 Assembly Instructions

NOTE: Please check contents and read directions carefully before assembly. If any items are missing or damaged, do not take the
product back to the store. Call Moon Valley customer service at 313-766-4950 and we will correct the problem as promptly and
as efficiently as possible. Also, checking or cracking of the logs is a natural part of the drying aspect of cedar. This does not affect
the structural integrity of the wood. This natural occurrence enhances the rustic beauty of the product.
D
A
B
C
A
D
A
N
D
O
B C
A
Thank you for your Moon Valley purchase and we hope that you enjoy your 28" End Table. To view other
Moon Valley products, please contact your local dealer or visit us at www.moonvalleycedarworks.com.
www.moonvalleycedarworks.com
M-1800 28" End Table Assembly Instructions
28" End Table Components
(4) Legs (A)
(2) Doweled Leg Braces (B)
B
(1) Doweled Cross-Brace (C)
(1) Pre-Assembled Table Top (D)
2 ½" Square-Head Screws (N) see attached hardware sheet
2" Square-Head Screws (O) see attached hardware sheet
C
Tools Needed: Rubber Mallet or Hammer w/padding, Drill or screwdriver
Assembly
Step1:
Insert doweled leg braces (B) into the legs (A), join both leg sets with
the cross-brace (C) (as shown). Use rubber mallet to tap dowels into pre-
drilled holes. If using hammer, be sure to pad impact area to avoid damage.
Step 2:
Insert leg assembly into holes on bottom of table top (D) (as shown).
Use rubber mallet to tap leg dowels into pre-drilled holes. Then, set table on
level surface and adjust legs accordingly to ensure table is level.
Drill 2 ½" screws (N) into each leg dowel (A) (4 total), attaching
Step 3:
them to the table bottom (D) (as shown).
Drill 2" screws (O) into every leg assembly dowel (6 total), securing
Step 4:
the legs (A), leg braces (B) and the doweled cross-brace (C) (as shown).
Moon Valley Cedar Works 12717 Marlin Drive, Redford, Mi 48239 Phone: (313) 766-4950
March 2012. Do not let children play with plastic bag.