Moon Valley M-1300 Assembly Instructions

46” round table set

M-1300 46" Round Table Set Assembly Instructions

NOTE: Please check contents and read directions carefully before assembly. If any items are

missing or damaged, do not take the product back to the store. Call Moon Valley customer

service at 866.332.1616 and we will correct the problem as promptly and as efficiently as

possible. Also, checking or cracking of the logs is a natural part of the drying aspect of cedar.

This does not affect the structural integrity of the wood. This natural occurrence enhances the

Tools Required: Rubber Mallet or Hammer, Electric Drill or Screwdriver w/ Square-Head Bit,

rustic beauty of the product.

46" Round Table Set Components

(1) Table

(4) Table Legs

(4) 11" Leg Braces

(4) 9" Leg Braces

(1) Pre-Assembled Table Top

(16) 2 ½" Lag Bolts

(4) 2 ½" Screws

(4) Leveling Glides

(4) Benches

(4) Pre-Assembled Bench Tops

(16) Bench Legs

(8) 8 ½" Leg Braces

(8) 18" Seat Braces

(8) 2 ½" Lag Bolts

(8) 3 3/8" Lag Bolts

(16) 2" Screws

(16) 2 ½" Screws

½" Socket & Socket Wrench

Table

1. Insert table legs into pre-drilled holes in table top underlay.

Use rubber mallet to tap any doweled ends into place. If using

a hammer, be sure to pad impact area to avoid damaging the

product.

Table of Contents

Need help?

Do you have a question about the M-1300 and is the answer not in the manual?

Page 1 NOTE: Please check contents and read directions carefully before assembly. If any items are missing or damaged, do not take the product back to the store. Call Moon Valley customer service at 866.332.1616 and we will correct the problem as promptly and as efficiently as possible.
Page 2 2. Use 2 ½” lag bolts to secure 11” leg braces to the table legs, as well as to bottom of table (as shown in these two photos). 3. Use 2 ½” lag bolts to secure the 9” leg braces to the table legs and to the table underlay (as shown in these two photos).
Page 3 Benches 6. Insert 8 ½” leg braces into pre-drilled holes on bench legs to join legs and create leg assembly. Use mallet to tap them into place. Note: Newer table models will utilize 8 ½” braces which recess into holes on table legs. 7.
Page 4 11. Use 2” screws to secure the 8 ½” leg braces to the bench legs, as identified by arrows in photo. Thank you for your Moon Valley purchase and we hope that you enjoy your 46” Round Table Set. To view other Moon Valley products, please visit us at www.moonvalleyrustic.com.