Table of Contents
Advertisement
Chapter 4: Motherboard Connections
Gigabit LAN Ports
There are two gigabit LAN ports located on the I/O back panel (LAN1 & LAN2). These ports
accept an RJ45 type cable.
VGA Port
There is one VGA port on the rear I/O panel.
UID Switch and UID LED Indicator
A Unit Identifier (UID SW) switch and UID LED (LED1) are located on the I/O backpanel. The
rear UID LED (LED1) is located next to the UID switch. When you press the UID switch, both
rear and front UID LED indicators will turn on. Press the UID switch again to turn off the LED
indicators. The UID Indicator provides easy identification of a system that may be in need of
service. See page 36 for the front panel UID LED header location on JF1.
Note: UID can also be triggered via IPMI on the motherboard. For more information on IPMI,
please refer to the IPMI User's Guide posted on our website at
http://www.supermicro.com
55
Advertisement
Table of Contents
