Environment Requirements - Huawei SUN2000-250KTL Series User Manual

SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series
User Manual
●

1.3 Environment Requirements

Do not expose the equipment to flammable or explosive gas or smoke. Do not
perform any operation on the equipment in such environments.
Do not store any flammable or explosive materials in the equipment area.
Do not place the equipment near heat sources or fire sources, such as smoke,
candles, heaters, or other heating devices. Overheat may damage the equipment
or cause a fire.
Install the equipment in an area far away from liquids. Do not install it under
areas prone to condensation, such as under water pipes and air exhaust vents, or
areas prone to water leakage, such as air conditioner vents, ventilation vents, or
feeder windows of the equipment room. Ensure that no liquid enters the
equipment to prevent faults or short circuits.
To prevent damage or fire due to high temperature, ensure that the ventilation
vents or heat dissipation systems are not obstructed or covered by other objects
while the equipment is running.
General Requirements
●
●
Issue 02 (2022-12-20)
Do not perform any improper operations, for example, dropping cables
directly from a vehicle. Otherwise, the cable performance may deteriorate due
to cable damage, which affects the current-carrying capacity and temperature
rise.
D ANGER
D ANGER
D ANGER
WARNING
WARNING
Ensure that the equipment is stored in a clean, dry, and well ventilated area
with proper temperature and humidity and is protected from dust and
condensation.
Do not install or run the equipment beyond the technical specifications.
Otherwise, its performance and safety will be compromised.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
7