SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series
User Manual
2.5 Working Principles
2.5.1 Circuit Diagram
The SUN2000 receives inputs from 28 PV strings. The inputs are grouped into 6
MPPT circuits inside the SUN2000 to track the maximum power point of the PV
strings. The DC power is converted into three-phase AC power through an inverter
circuit. Surge protection is supported on both the DC and AC sides.
Figure 2-9 Schematic diagram
2.5.2 Working Modes
The SUN2000 can work in Standby, Operating, or Shutdown mode.
Issue 02 (2022-12-20)
NO TE
● The PV connection indicator and the grid connection indicator preferentially indicate
environmental faults.
● Local maintenance refers to operations performed after a USB flash drive, WLAN
module, or USB data cable is inserted into the USB port of the SUN2000. For example,
import and export data using a USB flash drive, or connect to the app using a WLAN
module or USB data cable.
● If the alarming and the local maintenance happen concurrently, the alarm/maintenance
indicator shows the local maintenance state first. After the USB flash drive, WLAN
module, or USB data cable is removed, the indicator shows the alarm state.
Copyright © Huawei Technologies Co., Ltd.
2 Overview
21