Ballard Designs Original Home Office MO232 Manual

One drawer cpu cabinet

PRODUCT NAME: Original Home Office™ One Drawer CPU Cabinet

ITEM NUMBER: MO232

ASSEMBLED DIMENSIONS : 27"H x 16"W x 19"D

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

UPDATED: 2-24-2021

Prevent accidentally discarding small parts or

hardware. Retain all carton contents until assembly

and installation are complete.

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

IMPORTED

Page 1 of 3

Table of Contents

Need help?

Do you have a question about the Original Home Office MO232 and is the answer not in the manual?

Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Original Home Office™ One Drawer CPU Cabinet ITEM NUMBER: MO232 ASSEMBLED DIMENSIONS : 27”H x 16”W x 19”D Prevent accidentally discarding small parts or hardware. Retain all carton contents until assembly and installation are complete. PRODUCTS ARE NOT INTENDED IMPORTED FOR COMMERCIAL USE.
Page 2 Assemble in location for intended use. REQUIRED TOOLS: Phillips Screwdriver -Two person assembly suggested. REMOVE Remove all parts, hardware and from Drawer protective packaging from carton and carefully arrange on a clean, HARDWARE Here level, padded surface. Ltr. Qty. Hardware Included WARNING Wall Anchoring Tip-Over Hazard...
Page 3 WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Large Screw Small Screw WARNING Tip-Over Hazard Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt Installation: 1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit. 2.