Programmes; Settings - Electrolux ESI5211LOX User Manual

5. PROGRAMMES

Programme
2)
3)
4)
5)
1) The pressure and the temperature of the water, the variations of the mains supply, the op-
tions and the quantity of dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption for
crockery and cutlery with normal soil. (This is the standard programme for test institutes).
3) This programme has a high temperature rising phase for better hygiene results. During the
rinsing phase, the temperature stays at 70 °C for at least 10 minutes.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.
5) Use this programme to quickly rinse the dishes. this prevents the remaining food to bond on
the dishes and bad odours to come out from the appliance. Do not use detergent with this
programme.
5.1 Information for test institutes
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com

6. SETTINGS

6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Degree of soil Programme
Type of load phases
Normal soil • Prewash
Crockery and • Wash 50 °C
cutlery • Rinses
• Dry
Heavy soil • Prewash
Crockery, cut- • Wash 70 °C
lery, pots and • Rinses
pans • Dry
Normal soil • Prewash
Crockery and • Wash 65 °C
cutlery • Rinses
• Dry
Fresh soil • Wash 60 °C
Crockery and
cutlery • Rinses
All • Prewash
Consumption values
1)
Duration
(min)
195
140 - 160 1.3 - 1.5
100 - 120 1.2 - 1.5
30
or 65 °C
14
Write down the product number (PNC)
that is on the rating plate.
In user mode, the following settings
can be changed:
• The level of the water softener
according to the water hardness.
These settings will be saved until you
change them again.
ENGLISH
Energy Water
(kWh) (l)
1.039 11
13 - 15
15 - 17
0.9 9
0.1 4
7