designer's image 211-4569 Assembly Instructions Manual page 5

STEP 2
A
(H5)
Wall
(H4)
(H5)
(H3)
(H5) x 1 (H3) x 2 (H4) x 2
back support long screw wall anchor
1. Place the top shelf (A) onto the side support brackets (H1).
2. Center and mark the location of the back support bracket (H5) then remove top shelf.
3. Predrill the bracket hole locations with a 1/4 in. hole.
4. Insert wall anchors (H4) and secure the back support bracket with long screws (H3). Anchors are not required if installing directly into studs.
5