Advanced Option - NEC MultiSync P401 User Manual

Nec multisync p401: user guide
Hide thumbs

Advertisement

Table of Contents

ADVANCED OPTION

INPUT DETECT
Selects the method of input detection the monitor uses when more than two input devices
are connected.
All inputs except for TV*
NONE
The Monitor will not search the other video input ports.
FIRST DETECT
When the current video input signal is not present, then the monitor searches for a video signal
from the other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically.
The monitor will not look for other video signals while the current video source is present.
LAST DETECT
When the monitor is displaying a signal from the current source and a new secondary source
is supplied to the monitor, the monitor will automatically switch to the new video source.
When current video input signal is not present, the monitor searches for a video signal from
the other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically.
VIDEO DETECT
DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2 or S-VIDEO inputs will have priority over
DVI, VGA, RGB/HV. When DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2 or S-VIDEO
input signal is present the monitor will change and keep to the DVD/HD1, DVD/HD2, SCART,
VIDEO1, VIDEO2 or S-VIDEO input.
CUSTOM DETECT
Set the priority of input signals.
When CUSTOM DETECT is selected, monitor searches listed inputs only.
INPUT CHANGE
Sets input change speed.
NOTE: When "QUICK" is selected, picture may be distorted when signal input is changed.
This function should be chosen after all adjustment options have been made for the input.
LONG CABLE COMP
Manually compensates for image degradation caused from using a long cable.
EQUALIZE
VGA, RGB/HV inputs only
POLE
Adjusts frequency.
PEAK
Adjusts equalizing value.
GAIN
Adjusts gain value.
OFFSET
Adjusts slice level of synchronized signal.
SYNC TERMINATE
Selects the terminate resistance for matching the cable impedance.
RGB/HV inputs only
TERMINAL SETTING
DVI MODE
Selects the kind of DVI-D equipment which is connected to the DVI input. Select "DVI-PC"
when PC or other computer equipment is connected. Select "DVI-HD" when DVD player,
which has DVI-D output, is connected.
BNC MODE
Selects the kind of equipment which is connected to the BNC input.
RGB: Analog input
COMPONENT: Component
VIDEO:
SCART MODE
Input mode for devices using SCART connectors.
HDMI SIGNAL
RAW: Disable the expanded feature.
EXPAND: Expand image contrast and increase detail in the dark and bright areas.
SCAN CONVERSION
Selects the IP (Interlace to Progressive) conversion function.
Note: For DVI input "DVI-HD" needs to be enabled in the DVI mode menu.
All inputs except VGA, RGB/HV
PROGRESSIVE
Converts interlaced signals to progressive. This is the default setting.
INTERLACE
Disables IP conversion. This setting is best suited for motion pictures, but increases the risk
of image retention.
*: The product you purchased may not have this feature.
English-25
FIRST DETECT
NORMAL
OFF
0
0
0
0
HIGH
DVI-PC
RGB
OFF
EXPAND
PROGRESSIVE

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for NEC MultiSync P401

Table of Contents