Speedy Cooking; Weight Defrost Function; Time Defrost Function - Russell Hobbs RHEM30LN Instructions And Warranty

30l electronic microwave oven
Table of Contents

Advertisement

b. Press "1", "5", "0", "0" in that order.
c. Press "POWER" once, then press "5" to select 50% microwave power.
d. Press "START/+30SEC." to start cooking.
6.
Note: 1) In the process of cooking, if the "STOP/CANCEL" button is pressed or if there is no operation
within 1 minute, the oven will go back to the former setting automatically.
2) If "PL0" is selected, the oven will work with fan for no power. You can use this level to remove odour
from the oven.
3) During microwave cooking, "POWER" can be used to change the power you need. After pressing
"POWER", the current power will flash for 3 seconds, now you can press the number button to change
the power. The oven will work with the selected power for the remaining time.

SPEEDY COOKING

1.
In waiting state, instant cooking at 100% power level can be started by selecting a cooking time from 1
to 6 minutes by pressing number pads 1 to 6. Press " START/+30SEC." to increase the cooking time.
The maximum cooking time is 99 minutes and 99 seconds.
2.
In waiting state, instant cooking at 100% power level with 30 seconds' cooking time can be started by
pressing "START/+30SEC". Each press on the same button will increase cooking time by 30 seconds.
The maximum cooking time is 99 minutes and 99 seconds.
3.
Note: During microwave cooking and time defrost, time can be added by pressing "START/+30SEC."
button.

WEIGHT DEFROST FUNCTION

1.
Press "WEIGHT DEFROST", LED will display "dEF1". Press numerical buttons to input weight to be
defrosted.
2.
Input the weight ranged between 100~2000 g.
3.
If the weight input is not within 100~2000, the input will be invalid.
4.
The oven will not work until valid numbers are inputted.
5.
Press " START/+30SEC. " to start defrosting and the remaining cooking time will be displayed.

TIME DEFROST FUNCTION

1.
Press "TIME DEFROST", LED will display "dEF2".
2.
Press number pads to input defrosting time. The effective time range is 00:01~99:99. The default
microwave power is power level 3. If you want to change the power level, press "POWER" once, and
the LED will display "PL 3", and then press the number pad of the power level you wanted.
3.
Press "START/+30SEC." to start defrosting. The remaining cooking time will be displayed.
POPCORN
1.
Press "POPCORN" repeatedly until the number you wish appears in the display, "50","100" grams will
11

Advertisement

Table of Contents
loading

Table of Contents