Remove Monitor Stand For Mounting - NEC MultiSync LCD1555V User Manual

Tilt
Grasp both sides of the monitor screen with your hands
and adjust the tilt as desired (Figure TS.1).

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:
1. Disconnect all cables.
2. Place monitor face down on a non-abrasive surface (Figure R.1).
3. Remove the 2 screws connecting the monitor to the stand and lift off the
stand (Figure R.2).
4. Remove the 2 hinge screws (Figure R.3).
5. Connect the AC cord and signal cable to the back of the monitor (Figure R.4).
6. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting method.
NOTE: Handle with care when removing monitor stand.
Figure R.1
Figure R.3
LCD1555V110502.p65
–continued
non-abrasive
surface
5
5
Figure TS.1
Figure R.2
Figure R.4
11/20/02, 8:49 AM