Saeco Royal PLUS Operation And Maintenance Manual page 70

English
Insert the brew group into its seat again until it locks
into place WITHOUT pressing the "PRESS" button.
Close the service door. Insert the coffee grounds
drawer and the drip tray.
10.2.9 Descaling
Limescale is a natural part of the water used for
machine operation. It needs to be removed regularly
as it may clog the water and coffee circuit of your
appliance. The machine indicates on the display when
descaling is required.
Just follow the steps described below. This operation
needs to be carried out before the appliance stops
working properly, as in this case repair is not covered
by warranty. The descaling and maintenance products
can be purchased from your local dealer or the
authorised support centres.
Never drink the descaling
solution.
Never use vinegar as a
descaling solution.
If installed, remove the
anti-scale filter from the
water tank before adding
the descaling solution.
If installed, remove the red
tank closing cap from the
water tank.
Turn on the machine by pressing the ON/OFF button.
Wait for the machine to complete the rinse and
warm-up processes.
70
START
DESCALING?
yes
Select "YES" and press the "OK" button.
REMOVE
WATER FILTER
OK
This screen will be visible
only if the water filter has
been activated.
Remove the tank from the machine and empty it.
Remove the anti-scale filter. Select "OK" and press the
"OK" button.
POUR
DESCALER INTO
THE WATER TANK
OK
Pour 250 ml of descaling product into the water tank.
Select "OK" and press the "OK" button.
ADD WATER
UP TO LEVEL
CALC CLEAN
OK
Put back the water tank. Add water into the water
tank up to the "CALC CLEAN" level. Select "OK" and
press the "OK" button.
EMPTY
THE DRIP
TRAY
OK
Remove and empty the drip tray.
no
Exit
Exit
Exit
Exit