Saeco Royal PLUS Operation And Maintenance Manual page 66

English
10.2.6 Brew Group Cleaning
The brew group should be cleaned whenever the
coffee bean hopper is filled, or at least once a week.
Turn off the machine by switching the power button
to the "O" position and remove the plug from the
socket. Extract the drip tray and the coffee grounds
drawer.
Open the service door.
Remove the brew group by pulling it by the handle and
pressing the «PRESS» button. The brew group must be
washed with lukewarm water only. Do not use any
detergent.
66
Wash the brew group with lukewarm water; carefully
wash the upper filter. Before placing the brew group in
its seat, ensure that there is no water left in the
brewing chamber.
Make sure that the brew group is in the off position.
The two reference marks must match.
If they do not match, proceed as described below:
Ensure that the lever is in contact with the brew
group base.
Make sure that the hook which locks the brew group is
in the correct position. firmly press the "PRESS"
button to check its position.