Saeco Royal PLUS Operation And Maintenance Manual page 43

MENU ITEM
Off
On
Stand-by Settings
15 minutes
30 minutes
60 minutes
180 minutes
Off
ALARMS
Coffee grounds drawer full
alarm
Off
On
Descaling
Off
On
CAPP. QUICK
Off
On
Exit
PRE-GRINDING
Off
On
Pre-brewing
Off
Low
High
Temperature
Range from -5 to +5
Product button
RISTRETTO
Espresso x2
USER PW
Description
This way, the coffee boiler is always kept at the brewing temperature. This results in higher
energy consumption because the machine is always ready for use.
This way, the coffee boiler, when in off position, is kept at a lower temperature than the
one needed to brew a beverage. The machine saves energy but takes longer to start
brewing a beverage. By default, this settings is disabled by the appliance factory settings.
To set the time interval for the machine to go into stand-by mode after the last brewing.
The default time value is «after 30 minutes».
The setting that is currently active is highlighted by a pink background.
The machine moves to stand-by mode after the set time. To reactivate the machine, press
any button. After performing the function diagnostics and the warm-up phase, the machine
is again ready for use. When the parameter is set to "OFF", the machine is always active.
It allows you to activate and deactivate some alarms.
This function allows you to enable/disable the dregs alarms, i.e. the warning on the drawer
with the already brewed coffee pods being full and its need to be emptied.
The setting that is currently active is highlighted by a pink background.
alarm disabled
alarm enabled
This function enables/disables the warning (no blocking) on the need to descale the
machine hydraulic circuit. This alert is displayed by a special icon on the "Ready for use"
screen (see page 57).
The setting that is currently active is highlighted by a pink background.
With this setting, the warning message is disabled.
By doing so, the warning message is enabled; the message will be displayed whenever the
machine requires a descaling cycle.
This function allows you to enable/disable the "Cappuccinatore Washing" alarm, which is
the warning for the Cappuccinatore quick clean.
With this setting, the warning message is disabled.
By doing so, the warning message is enabled.
This option allows the user to go back to the menu top level
This function enables/disables the pre-grinding prior the next coffee dose. This way, upon
selecting the beverage, the user will already have the coffee powder ready for brewing and
will save the grinding time.
The setting that is currently active is highlighted by a pink background.
With this setting, the pre-grinding function is disabled.
With this setting, the pre-grinding function is enabled;
This function adjusts the break time between pod pre-brewing and its actual dispensing.
The setting that is currently active is highlighted by a pink background.
It disables pre-brewing
It activates a short break between pre-brewing and dispensing (2 sec)
It activates a long break between pre-brewing and dispensing (4 sec)
This function allows you to adjust any increase/decrease in the coffee temperature inside
the cups
It allows to lower or increase the temperature of the product on a range between -5 and
+5.
It sets up the Ristretto button
It sets up the Ristretto button for the Ristretto product brewing
It sets up the Ristretto button for the Doppio Espresso product brewing
This function allows you to set or disable the password to access the User menu.
NOTE:
Enter the value '0000' as password to disable the password.
If you forget the PASSWORD, you must start a reset procedure. Please contact Saeco
(Evoca group) customer service.
English
43