Saeco Royal PLUS Operation And Maintenance Manual page 44

English
MENU ITEM
TECH. PW
Exit
Display Menu
Language
Contrast
Display Logo
Standard
Bean
Custom
Exit
Water Menu
Hardness
FILTER (0/8)
Water Net
Exit
Descaling
FACTORY SETUP
READ CONFIG
WRITE
CONFIG
Statistics
44
Description
This function allows you to set or disable the password to access the Tech. menu.
NOTE:
Enter the value '0000' as password to disable the password.
If you forget the PASSWORD, you must start a reset procedure. Please contact Saeco
(Evoca group) customer service.
Warning:
The technical menu password also allows you to access the user menu
This option allows the user to go back to the menu top level
This menu allows you to set the language for the texts displayed on the screens and the
display contrast ratio.
This setting allows you to select the user interface language from those available.
The language currently in use has a pink background.
To set the correct display contrast according to room illumination.
This function allows you to change the image (logo) displayed on the "ready for use" screen
and during machine start-up.
The setting that is currently active is highlighted by a pink background.
The standard logo is displayed, i.e. "ROYAL".
A coffee bean is display as logo.
This function allows you to set a customised logo by means of the Windows app provided
to our customers.
This option allows the user to go back to the menu top level
This menu allows you to specify the water hardness used on the machine and control filter
activation.
To change the water hardness setting in the machine. The "Water Hardness" function
allows you to adapt your machine to the water hardness level you use, so that the
machine will signal to the user to descale the system at the appropriate time. Measure the
water hardness as shown in the section "Measuring and adjusting water hardness".
It allows you to check the water filter activation status and, possibly, to activate a new one.
It enables/disables the water mains connection
This option allows the user to go back to the menu top level
This function starts the descaling cycle as described in the relevant section.
This function allows you to return all machine configurations and products' doses to the
factory-set values.
NOTE: the use of this function does not alter the following:
- Credits
- Password
- Filter status
- Counters and statistics on use
This function allows you to overwrite the current machine configuration (settings and
doses), by loading another one via the USB key.
NOTE:
The configuration file on the key must have been previously generated by a Royal Plus
machine and should have the .MEM extension.
In this menu you can save the current machine configuration and the statistics on its use to
the USB key.
This function allows you to generate and save a .MEM file with the current machine
configuration (settings and doses) to the USB key.
NOTE:
The generated .MEM files can be used to overwrite the Royal Plus machine configuration.
This function allows you to save in .TXT format the machine use statistics to the USB key,
i.e.:
- Beverage counters
- Errors list
- Maintenance cycles performed