Roland TrueVIS SG3-540 Setup Manual page 29

1. Assembly and Ink Filling
5. Install the dancer roller.
Procedure
1.
Raise the dancer roller and place it on the stand legs.
MEMO
The dancer roller has no particular front and rear orientation.
2.
On the right side of the dancer roller, bring the flat surface of the shaft (A) toward you, and then tempo-
rarily tighten the bolt.
3.
On the left side of the dancer roller, temporarily tighten the bolt.
MEMO
Both sides of the shaft are flat on the left side of the dancer roller.
28
Installation