Advertisement
Cadiz Installation Guide - Surface Profiles – v2022
Disassemble the Glass to Wall brackets being careful not to damage the face plates. With the
11
clear plastic gaskets inserted between the brackets and the glass and the wall screw plates
facing inwards, align the brackets centrally in the slots in the glass, hold them in place and
mark the screw hole positions.
Mark the wall profile at the top edge of the glass so that it can be trimmed flush.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
Use the suction glass lifters to remove the Return panel, making a note of the
12
number and position of the rubber strips that you have placed under the panel.
Unscrew and remove the wall profiles.
Drill 7mm holes for the wall brackets in the positions marked and insert the wall
plugs. Apply a small amount of silicone around the holes in the wall to prevent any
water from leaking into the wall.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
9
Advertisement
