Advertisement
Cadiz Installation Guide - Surface Profiles – v2022
Wall leans IN
For 17 mm wall profile:
3
If your wall leans inwards, cut 0-5 mm from the wall end of each underframe side; if it leans
outwards, cut 5-10 mm from each side. If the wall is at right angles to the floor or tray, cut
5 mm from each side.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
Wall leans OUT
10 mm
5 mm
Wall does not lean
0 mm
-10mm
4
If the underframe is being installed on a tray, its position in relation to the edge of
the tray must also be considered. Ideally, the outer edge of the underframe should
10 mm back from the edge of the tray on all sides.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
5
Tray
Advertisement
