Advertisement
Cadiz Installation Guide - Surface Profiles – v2022
Drill 7 mm holes in the wall where marked and insert wall plugs. Replace the door.
21
Using only the four outer screw holes, tightly screw the hinges to the wall. To prevent damage
to the hinge plates, open the door outwards to gain access to the inner screw holes, insert
screws and tighten fully.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
Notch
12.5mm
The other length of vertical seal is to be cut in 3 sections to fit to the door above,
22
below and between the hinges.
For maximum resistance to leakage, the seal sections should be cut as shown
above to allow them to fill the gaps in the hinge through which water might
otherwise escape.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
Slit
Slit bubble here
14
Advertisement
