Advertisement
Cadiz Installation Guide - Surface Profiles – v2022
FRONT
(Door)
Temporarily assemble the underframe and place it in position on the floor or tray.
1
1
The front section of underframe is factory cut to the correct length to suit your Door and
MUST NOT be shortened.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
SIDE
(Return Panel)
Wall leans IN
The side section of underframe is supplied at maximum length to be cut down on
2
site to accommodate any lean in or lean out of the wall relative to the floor.
If you are using 24 mm Recessed Wall profiles and if your wall leans inwards, cut
0-9 mm from the wall end of each underframe side; if it leans outwards, cut 9-18
mm from each side. If the wall is at right angles to the floor or tray, cut 9 mm from
each side.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
Wall leans OUT
18 mm
9 mm
Wall does not lean
0 mm
4
Advertisement
