Advertisement
Cadiz Installation Guide - Surface Profiles – v2022
Handle side of door viewed from inside of door
Cut the horizontal seal to the width of the door for fitting to the bottom edge of the door with
25
the deflector blade facing inwards.
On the handle side of the door, notch the deflector blade and side wall of the seal, as shown
in the top illustration, to clear the vertical seal on the Return panel.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
OUTWARD
INWARD
OPENING
OPENING
DOOR
DOOR
Push the underframe insert into the underframe channel under the door noting
26
the difference in orientation for outward and inward opening doors.
The vertical blade of the insert should be notched at each end as shown to allow
any water to drain back from the underframe to the inside of the shower
enclosure.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
16
5-6mm
Notch
Advertisement
