APRILIA V990 Manual page 21

V990 engine
ã
Follow
FUEL SUPPLY SYSTEM
Type
Choke W w ñ å
Choke ü
FUEL SUPPLY
Type
Fuel
SPARK PLUGS
Standard
Spark plug gap
Resistance
ELECTRIC SYSTEM
Generator (with permanent magnet) W w ñ å
Generator (with permanent magnet) ü
Starter
Starter motor gear ratio
 ,5"2)#!.4 #(!24
Engine oil (recommended):
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or superior to the
CCMC G-4, A.P.I. SG specifications.
Bearings and other lubrication points (recommended):
As an alternative to the recommended product, use high-quality grease for rolling bearings, working temperature range -30 °C...+140 °C,
dripping point 150 °C...230 °C, high protection against corrosion, good resistance to water and oxidation.
Clutch fluid (recommended):
Use only antifreeze and anticorrosive without nitrite, ensuring protection at -35 °C at least.
Engine coolant (recommended):
Release 00/2001-06
v
EXTRA RAID 4, SAE 15W - 50 or Ø TEC 4T SAE 15W - 50.
a
Use new clutch fluid only.
v
F.F., DOT 5 (DOT 4 compatible) or Ø BRAKE 5.1, DOT 5 (DOT 4 compatible).
a
v
ECOBLU -40 °C or Ø COOL.
electronic injection
Ø 51 mm
Ø 47 mm
indirect injection (MULTIPOINT)
pr emium grad e unleaded petrol , m in. O.N . 95
(N.O.R.M.) and 85 (N.O.M.M.).
NGK R DCPR9E
0.6 – 0.7 mm
5 kΩ
12 V – 400 W (350 W for models W w up to 2000)
12 V – 470 W
12 V/0.9 kW
i = 49/9* 30/11* 64/30 = 31.677
v v
AUTOGREASE MP or Ø GREASE 30.
Bimol Grease 481,
WARNING
WARNING
TECHNICAL INFORMATION
2 - 5
OILO-UK
- 00