Table of Contents
Advertisement
Quick Links
INSTALLATION MANUAL
Level of Difficulty
Easy
Weight Capacity
Gross trailer weight (GTW)
Tongue weight (TW)
Parts List
Item Qty Description
1
1
Adjustable shank
2
1
Dual ball
3
2
Pin
4
1
Clip
Hitch pin and clip not included
Tools Required
None
Maintenance
Mild automotive detergent may be used to
clean the product. Do not use dish detergent,
abrasive cleaners, abrasive pads, wire
brushes or other similar products that
may damage the finish.
CURTMFG.COM
•
PRODUCT SUPPORT: 877.287.8634
Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of
the mount system are intended to represent the capability of the product and in no way
reflect the ratings or capacity of the towing system it is being used with. The consumer
or operator are strongly advised to learn the ratings of the various components of the
towing system and never exceed the limits of the lowest rated component being used.
20,000 lbs.
Use of any pin other than that of the mount system manufacturer
2,000 lbs.
could be a serious safety hazard and will void the warranty.
Never hook up trailer safety chains to the mount system. Ensure the safety
chains operate freely around the mount system and do not become entangled.
Product Photo
NOTICE
Before you begin installation, read all instructions thoroughly.
Product Registration and Warranty
CURT stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys
•
45937-INS-RA
•
08/09/2022
•
ECN9781
•
PAGE 1
45937
Advertisement
Table of Contents
Related Manuals for Lippert CURT 45937
Summary of Contents for Lippert CURT 45937
- Page 1 INSTALLATION MANUAL 45937 Level of Difficulty WARNING Easy Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of the mount system are intended to represent the capability of the product and in no way reflect the ratings or capacity of the towing system it is being used with. The consumer or operator are strongly advised to learn the ratings of the various components of the Weight Capacity towing system and never exceed the limits of the lowest rated component being used.
- Page 2 ASSEMBLY & SETUP Parts List Step 3 - Attach the Tongue Item Qty Description Based on the determined ball height, slide the tongue onto the shank and align with the proper hole locations. Adjustable shank Dual ball Angle the tongue slightly upwards and press in toward the shank. Insert a pin (#3) into the top tongue hole first.
Need help?
Do you have a question about the CURT 45937 and is the answer not in the manual?
Questions and answers