Download Print this page
Lippert Curt 18110 Installation Manual

Lippert Curt 18110 Installation Manual

Advertisement

Quick Links

INSTALLATION MANUAL
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
Weight Carrying Capacity
Weight capacity
Parts List
Item Qty Description
1
2
Platform frame, half
2
1
Shank, 1-1/4"
3
2
Connecting plate
4
1
Shank adapter, 2"
5
1
Clip
6
1
Hex bolt, 1/2"
7
1
Spring washer, 1/2"
8
1
Flat washer, 1/2"
9
14
Lock nut, M10
10
12
Carriage bolt, M10 x 20mm
11
2
Carriage bolt, M10 x 75mm
12
1
Flat brace
13
2
Support bridge
14
2
Round tube pad
Tools Required
Wrench set
Adjustable wrench
Torque Specifications
M10 bolt
16 ft-lbs.
Use above torque setting unless otherwise noted
CURTMFG.COM
PRODUCT SUPPORT: 877.287.8634
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity.
Do not exceed the capacity of your lowest rated towing component.
Do not exceed maximum weight capacity of 300 lbs. when using 2" receiver tube.
Distribute the weight evenly on platform when hauling a load.
Do not carry loads taller, wider or deeper than the cargo carrier. Do not carry flammable items
on carrier or allow exhaust fumes to blow directly on your cargo. This is a fire hazard.
Always use caution when in reverse (R) to help avoid personal injury.
Loads must be evenly distributed.
300 lbs.
Never use as a step or platform - injury may result.
Do not use to carry flammable items or allow exhaust
fumes to blow directly on items in the carrier – fire hazard.
Do not use to transport people.
Do not block brake lights or turn signals.
Product Photo
NOTICE
Visit www.curtmfg.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Periodic inspection of your product should be performed
to ensure all hardware and / or components remain secure.
Product Registration and Warranty
CURT stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys
18110-INS-RB
04/21/2021
ECN8300
PAGE 1
18110

Advertisement

loading
Need help?

Need help?

Do you have a question about the Curt 18110 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lippert Curt 18110

  • Page 1 INSTALLATION MANUAL 18110 Level of Difficulty WARNING Easy Never exceed the vehicle manufacturer's recommended towing capacity. Do not exceed the capacity of your lowest rated towing component. Installation difficulty levels are based on time and effort involved and may vary depending on Do not exceed maximum weight capacity of 300 lbs.
  • Page 2 ASSEMBLY Parts List Parts List Parts List Item Qty Description Item Qty Description Item Qty Description Platform frame, half Spring washer, 1/2" Carriage bolt, M10 x 75mm Shank, 1-1/4" Flat washer, 1/2" Flat brace Connecting plate Lock nut, M10 Support bridge Shank adapter, 2"...
  • Page 3 Step 1 Step 3 Align the two platform halves (#1), as shown. Using the top two holes Using the bottom two holes, finish connecting the platform halves (#1) only, connect the platform halves (#1) and connecting plates (#3) with and connecting plates (#3) with M10 x 20mm carriage bolts (#10) and M10 x 20mm carriage bolts (#10) and M10 lock nuts (#9).