Advertisement
Quick Links
INSTALLATION MANUAL
Level of Difficulty
Moderate
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
Weight Carrying Capacity
Gross trailer weight (GTW)
Tongue weight (TW)
Parts List
Item Qty Description
1
4
Carriage bolt, 1/2-13" UNC,
1-1/4", grade 8
2
4
Serrated flange nut,
1/2"-13 UNC, grade 8
3
4
Square hole spacer,
1/4" x 1" x 3"
Tools Required
Ratchet
Fishwire, 1/2"
(includes 4 qty)
Socket, 3/4"
Tape measure
6" Socket extension
Die grinder
Torx bit, T-10, T-25
Tape
Torque wrench
Reciprocating saw/
Rotary tool
* For a tools reference guide visit
curtmfg.com/trailer-hitch-installation
CURTMFG.COM
•
PRODUCT SUPPORT: 877.287.8634
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity.
Product Photo
2,000 lbs.
200 lbs.
CAUTION
Use caution when trimming lower fascia
NOTICE
Visit www.curtmfg.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
This installation requires:
• Part removal and trimming of the underbody panel
Periodic inspection of the trailer hitch should be performed to ensure all
mounting hardware remains tight and structural components are secure.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
SAFETY INSTRUCTIONS
Safety glasses should be worn at all times while installing this product.
Product Registration and Warranty
CURT stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys
•
13496-INS-RA
•
12/13/2021
•
ECN9115
•
PAGE 1
13496
Advertisement
Related Manuals for Lippert Curt 13496
Summary of Contents for Lippert Curt 13496
- Page 1 INSTALLATION MANUAL 13496 Level of Difficulty WARNING Moderate Never exceed the vehicle manufacturer's recommended towing capacity. Installation difficulty levels are based on time and effort involved and may vary depending on the installer level of expertise, condition of the Product Photo vehicle and proper tools and equipment.
- Page 2 ASSEMBLY Parts List Item Qty Description Carriage bolt, 1/2-13" UNC, 1-1/4", grade 8 Serrated flange nut, 1/2"-13 UNC, grade 8 Square hole spacer, 1/4" x 1" x 3" HOLE ENLARGEMENT FISHWIRE TECHNIQUE REVERSE PULL FISHWIRE TECHNIQUE Insert coiled end of fishwire tool through hitch Attach the fishwire to mounting hole in vehicle frame rail and out the the carriage bolt and...
- Page 3 Step 1 From behind the driver-side wheel well, remove the screw using a T-25 torx bit. Remove the retaining screw using a T-10 torx bit from the retaining clip from the lower fascia. Finish removing the retaining clip that connects the lower fascia to the trunk pan. Repeat on the other side of the vehicle.
- Page 4 Step 3 Fishwire the carriage bolt (#1) and square hole spacer (#3) into each frame rail through an access hole in each frame rail to the forward- most mounting hole. The access hole may need to have the coating removed and / or be enlarged slightly to allow the hardware to pass through.
- Page 5 Step 5 Raise the hitch into position. Pull downward and rearward on the lower fascia to allow room for the hitch to pass between the fascia panel and trunk pan. Make sure to guide the fishwire through the holes in the hitch. Remove fishwire and secure the hitch using the supplied 1/2"...
Need help?
Do you have a question about the Curt 13496 and is the answer not in the manual?
Questions and answers