Yamaha TRACER 9 GT Owner's Manual page 54

Instrument and control functions
1 1 1
5
1. Rubber cover
TIP
Do not lose the rubber cover.
5. Insert the projection on the front of
the rider seat into seat holder B as
shown.
2 2
2 2 2
1. Projection
2. Seat holder B (for high position)
6. Align the projection on the bottom
of the rider seat with the "H" posi-
tion slot, and then push the rear of
the seat down to lock it in place as
shown.
1. Projection
2. "H" position slot
7. Install the passenger seat.
To change to the low position
1 1
1. Remove the passenger seat and
rider seat.
2. Remove the rider seat height posi-
tion adjuster by pulling it upward.
3. Install the rider seat height posi-
tion adjuster by inserting the rear
projections into the grommets.
1 1 1
1. Rider seat height position adjuster
2. Projection
2 2
3. Grommet
4. Install the rubber cover.
1. Rubber cover
TIP
Insert the projections in order from a to
d.
5-29
2 2
3 3
2 2
1 1 1
1
a
b
c
d