1. Turn the main switch off and turn
off the electrical circuit in ques-
tion.
2. Remove the fuse box cover by
pressing inwards at the two points
indicated on the cover and pulling
upwards.
3. Remove the blown fuse using the
fuse puller.
Periodic maintenance and adjustment
1. Fuse puller
4. Install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15132]
8-31
Specified fuses:
Main fuse:
50.0 A
Accessory fuse 2:
2.0 A
Terminal fuse 1:
2.0 A
Terminal fuse 2:
2.0 A
1 1 1
Heater fuse:
7.5 A
Headlight fuse:
7.5 A
Brake light fuse:
2.0 A
Signaling system fuse:
7.5 A
Ignition fuse:
10.0 A
Ignition fuse 2:
7.5 A
Radiator fan motor fuse:
15.0 A
ABS motor fuse:
30.0 A
ABS ECU fuse:
7.5 A
SCU fuse:
7.5 A
Fuel injection system fuse:
7.5 A
ABS solenoid fuse:
15.0 A
8