Monitor Assembly; Disassembly/Assembly Of Monitor Assembly (For 2.5"-Type Lcd); Disassembly/Assembly Of Hinge Assembly (For 2.5"-Type Lcd) - JVC GR-DVL767EG Service Manual

Hide thumbs Also See for GR-DVL767EG:
Table of Contents

Advertisement

4
1.4

MONITOR ASSEMBLY

1.4.1 Disassembly/assembly of monitor assembly
(for 2.5"-type LCD)
Note: Be careful not to soil or scratch the monitor screen
through the disassembly/assembly work.
1. Remove the four screws (1 to 4) in numerical order. While
disengaging the six hooks (L
order, remove the monitor cover assembly.
4
Note
a: When removing the monitor cover assembly, be
careful not to damage the FPC and connector.
2. Unlock the connector b and then disconnect the FPC
while lifting the hinge assembly upwards to remove it to-
gether with the FPC.
4
Note
b: For disconnecting the FPC, unlock the connector
first and then lift the hinge assembly upwards.
Accordingly, the FPC is disconnected together
with the hinge assembly.
4
c: Treat the wires carefully.
Note
: 0.069N·m (0.7kgf·cm)
∗∗
: 0.098N·m (1.0kgf·cm)
∗∗∗
: 0.147N·m (1.5kgf·cm)
MONI. FPC ASSY
Note
4
4
Note
d /
e
Hinge
4
4
a to L
f) in alphabetical
Hinge cover(1)
6
4
(S
d)
c
4
4
d /
e
5
4
Note
d /
4
(S
c)
Hinge assy
4
(L
g)
b
FPC
c
Hinge cover(2)
4
Note
c
3. Unplug the wires and FPCs from the two connectors ( c ,
d ) and then remove the LCD BL board assembly, holder
(PWB) and backlight in that order.
4. Remove the LCD module.
1.4.2 Disassembly/assembly of hinge assembly
(for 2.5"-type LCD)
1. Remove the three screws (5 to 7), and then remove the
hinge covers (1) and (2) by disengaging a total of four
4
hooks (L
g, L
2. Separate the SW board assembly and the FPC from the
hinge assembly.
4
Note
d: When connecting the FPC, arrange the FPC wire
by winding it around the shaft (hinge pin) of the
hinge assembly by two and a half turns while pay-
ing heed to the orientation of the hinge assembly
and FPC.
4
Note
e: When disassembling/assembling the hinge assem-
bly, pay careful attention to every part not to dam-
age anything.
(L
Monitor cover
assy
4
(L
b)
∗∗∗
3
∗∗∗
4
(S
b)
4
7
(S
4
b)
4
(S
d)
c
LCD BL PWB
b
a
4
Note
b
4
e
Holder
(PWB)
4
(L
h)
Backlight
LCD module
a
Fig. 1-4-1
4
h) at the two sides.
4
(L
f)
4
c)
(L
4
e)
∗∗
2
a
4
(L
d)
4
(S
a)
∗∗
1
4
(L
a)
4
(S
a)
d
a
4
Note
a
Bracket(Earth)
Monitor case assy
1-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gr-dvl767ekDvl865egDvl867eg

Table of Contents