Monitor Assembly; Disassembly/Assembly Of Monitor Assembly (For 2.5"-Type Lcd); Disassembly/Assembly Of Hinge Assembly (For 2.5"-Type Lcd) - JVC GR-DVL355EG Service Manual

Hide thumbs Also See for GR-DVL355EG:
Table of Contents

Advertisement

#
1.4

MONITOR ASSEMBLY

Note: The shape of the monitor assembly varies by the size
of the LCD screen.
For the 2.5"-type LCD, refer to Fig. 1-4-1.
1.4.1 Disassembly/assembly of monitor assembly
(for 2.5"-type LCD)
Note: Be careful not to soil or scratch the monitor screen
through the disassembly/assembly work.
1. Remove the four screws 1 to 4 in numerical order. While
disengaging the six hooks (L#a to L#f) in alphabetical
order, remove the monitor cover assembly.
2. Unlock the connector a and then disconnect the FPC
while lifting the hinge assembly upwards to remove it to-
gether with the FPC.
#
Note
a: For disconnecting the FPC, unlock the connector
first and then lift the hinge assembly upwards.
Accordingly, the FPC is disconnected together
with the hinge assembly.
#
b: Treat the wires carefully.
Note
* : 0.069N·m (0.7kgf·cm)
** : 0.098N·m (1.0kgf·cm)
MONI. FPC ASSY
Note
Note
13
c /
13
d
Hinge
1-8
Hinge cover(1)
6*
13
(S
d)
c
13
c /
13
d
5*
13
Note
c /
13
(S
c)
Hinge assy
(L
13
g)
b
FPC
c
Hinge cover(2)
13
Note
b
3. Unplug the wires and FPCs from the two connectors b ,
c , and then remove the MONITOR BL board assembly,
holder (PWB) and backlight in that order.
4. Remove the LCD module.
1.4.2 Disassembly/assembly of hinge assembly
(for 2.5"-type LCD)
1. Remove the three screws (5 to 7), and then remove the
hinge covers (1) and (2) by disengaging a total of four
hooks (L#g, L#h) at the two sides.
2. Separate the SW board assembly and the FPC from the
hinge assembly.
#
Note
c: When connecting the FPC, arrange the FPC wire
by winding it around the shaft (hinge pin) of the
hinge assembly by two and a half turns while pay-
ing heed to the orientation of the hinge assembly
and FPC.
#
Note
d: When disassembling/assembling the hinge assem-
bly, pay careful attention to every part not to dam-
age anything.
Monitor cover
assy
13
(L
b)
3**
13
(S
b)
4**
13
(S
b)
7*
13
(S
d)
LCD BL PWB
a
13
Note
a
13
d
Holder
(PWB)
13
(L
h)
Back light
LCD module
a
Fig. 1-4-1
(L
13
c)
(L
13
f)
13
(L
e)
2*
a
(S
13
a)
13
(L
d)
1*
13
(L
a)
13
(S
a)
b
c
Bracket(Earth)
b
Monitor case assy

Advertisement

Table of Contents
loading

Table of Contents