Ipod Setup; Speaker Setup; Audyssey Setup - NAD T755 Owner's Manual

iPod SETUP

The iPod Setup menu allows you to preset the following associated settings when iPod is the selected
source:
Enabled: Select "Yes" to enable iPod as a Source or "No" to disable it.
Auto: Select "Yes" to automatically enable and connect the iPod player docked in the linked NAD
iPod docking station when Source 5 (the default iPod source allocation in the T 755) is selected.
Select "No" if you do not want for the iPod connection automatically connected.
Menu Timeout: Set the time for the OSD to revert to the "Now Playing" display when the iPod
menu has been left idle (no scrolling or navigation being done) for the specified time out time. For
the "Now Playing" OSD to be shown, there should be a song paused or being played before going
to the iPod menu. You can set the "Menu Timeout" between the range 5s to 60s at 5s increments. If
you do not want for the menu to timeout, select "Off".

SPEAKER SETUP

After connecting all ancillary sources and other combinations, the Speaker Setup menu will guide
you on how to manage and setup your speakers in order to achieve optimum sound acoustics in your
listening environment.
The following are the Speaker Setup Menu sections.

AUDYSSEY SETUP

It has been shown that many, if not most, surround sound systems are not accurately configured and setup.
This requires special knowledge and instrumentation that the average person probably doesn't possess.
The T 755 has the capability to automatically setup your own unique Home Theatre's speaker system.
This is achievable through the T 755's Audyssey Setup feature along with the sophisticated digital
electronics built into your unit.
The installation of your new T 755 is greatly simplified by Audyssey Setup with the end result of
delivering the best quality sound possible given the type of speakers you have as well as your listening
room's dimensions.
Audyssey Setup takes up only a fraction of time to run compared with setting up your speakers
manually and then achieve results that rival other expensive test and setup measuring devices.
The following measurements are performed:
• Detection : Speaker configuration is detected including the number of surround speakers and
whether a subwoofer and center channel is connected.
• Size : T 755 crossover is set based on each channel's signal handling capability and the subwoofer
crossover is automatically set.
• Level : SPL of each speaker is matched within 1dB at the microphone position.
• Distance : is accurately set to within 1 foot (30 centimeters) of the microphone for each speaker
position.
• Polarity : the setup program will detect and notify the user if any speakers are connected
improperly. Incorrect polarity can ruin the illusion of realism offered by surround sound.
This is a one-time setup, unless speakers are moved or changed, in which case Audyssey Setup should
be performed again.
OPERATION
USING THE T 755 –SETUP MENU
19