Download Print this page

Sleep-Mode And Wake-Up - Beta ALP 125 cc Owner's Manual

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 81
1

8. SLEEP-MODE AND WAKE-UP

SLEEP MODE - The microcontroller enters
the sleep phase, characterised by low
power consumption when the shift position
switch is in the OFF position.
To conserve power during sleep mode,
every operation normally carried out by
the instrumentation is suspended; the
display and its backlighting are switched
off and only the updating of the current
time remains active.
Sleep mode is always possible, irrespec-
tive of the function selected.
WAKE-UP - Wake-up from sleep mode
occurs when the shift position switch is
in the ON position.
The following occurs immediately after
wake-up of the microcontroller:
● Display and signal indicator check for
approx. 3 seconds
● Screens displayed as shown in fi g. 17
for approx. 3 sec.
● Activation of the last function displayed
before the system went to sleep and
enablement of all functions.
GB
29

Advertisement

loading

This manual is also suitable for:

Alp 200 cc