Powr-Flite BP6 Series Operator's Manual
Backpack vacuum
Hide thumbs
Also See for BP6 Series:
- Operator's manual & parts list (20 pages) ,
- Operator's manual and parts list (22 pages)
Related Manuals for Powr-Flite BP6 Series
Summary of Contents for Powr-Flite BP6 Series
- Page 1 OPERATOR’S MANUAL Comfort Pro Backpack Vacuum BP6-BP10 Series 6 Quart 10 Quart WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. © Tacony Corporation, All rights reserved X9712 02/2020 Save These Instructions...
-
Page 2: Table Of Contents
NOTES Model Number: __________________________________________________________________________ Serial Number: ___________________________________________________________________________ Date of Purchase: ________________________________________________________________________ Retain this manual as a permanent record of your purchase. Introduction ...........3 Grounding Instructions ........3 Safety Instructions .........4 Machine Specifications ........5 Operating Instructions ........7 Maintenance...........11 Troubleshooting..........12... -
Page 3: Introduction
INTRODUCTION Check the carton for shipping damage. Carefully unpack and inspect your new Powr-Flite vacuum for shipping damage. Each unit is tested and thoroughly inspected prior to shipping. If damage is discovered, immediately notify the transportation company that delivered your machine and request an inspection. -
Page 4: Safety Instructions
Save These Instructions WARNING! Read all instructions before using. Save These Instructions. Following the cleaning instructions will prolong the life of your Powr-Flite vacuum. When using an electrical appliance, basic precautions should always be followed. 1. Use only as instructed in this manual. Use only the recommended attachments and replacement parts. -
Page 5: Machine Specifications
BP6S/BP10S TECHNICAL SPECIFICATIONS MODEL COMFORT PRO 6 COMFORT PRO 10 ITEM# BP6S BP10S BODY High Density Polyethylene High Density Polyethylene 10 in x 12.5 in x 26.5 in 13” x 11.5” x 26.5” DIMENSIONS (L X W X H) 25.4 cm x 31.8 cm x 67.3 cm 33 cm x 29.2 cm x 67.3 cm MACHINE WEIGHT (LBS. - Page 6 BP6P/BP10P TECHNICAL SPECIFICATIONS MODEL COMFORT PRO 6 PREMIUM COMFORT PRO 10 PREMIUM ITEM# BP6P BP10P BODY High Density Polyethylene High Density Polyethylene 10 in x 12.5 in x 26.5 in 13” x 11.5” x 26.5” DIMENSIONS (L X W X H) 25.4 cm x 31.8 cm x 67.3 cm 33 cm x 29.2 cm x 67.3 cm MACHINE WEIGHT (LBS.
-
Page 7: Operating Instructions
OPERATING INSTRUCTIONS Please read the following instructions carefully. They will help to get the best performance from this professional commercial vacuum cleaner and to maintain it in optimum condition. Always make sure the main power of the vacuum is off and the unit is not plugged in when doing any maintenance on the vacuum. - Page 8 OPERATING INSTRUCTIONS 7. Ensure that white bag is not protruding under cardboard collar. (Fig. 7) 8. NOTE: Cardboard must be properly seated inside gasket groove. Cardboard will be flush with gasket. (Fig. 8) 9. Replace lid, lock down the two latches and install hose.
- Page 9 OPERATING INSTRUCTIONS Pre-Motor Filter The pre-motor filter is located under the micro cloth filter. Inspect after each use. The filter can be washed using cold water and no detergent. Lay flat to dry. Replace every 6 months. 5. Remove the lid, the paper vacuum bag, and the cloth bag to expose the pre-motor filter.
- Page 10 OPERATING INSTRUCTIONS Wearing the Backpack Vacuum The backpack is designed to balance the weight of the vacuum on the hips, not the shoulders. 1. Adjust the Vari-Quick height adjuster to your back length. 2. Loosen all of the straps and place the vacuum on your back. Stabilizer Straps Shoulder Straps VariQuick Height Adjuster...
-
Page 11: Maintenance
MAINTENANCE Routine maintenance can significantly increase the life of your backpack vacuum. The applications and amount of use varies, so the recommendations listed below are for average-to- high volume use. Constant operation may require additional maintenance. Before Each Use 1. Inspect power cord for fraying, cuts or damage; do not use if damaged. 2. -
Page 12: Troubleshooting
TROUBLESHOOTING If the vacuum will not turn on: 1. Make sure the power cord is firmly connected to the unit and is in good condition. 2. Check sure the power cord is firmly seated in the wall outlet. 3. Check to see if the building circuit breaker is tripped. If circuit is overloaded, move the unit to another circuit. - Page 13 For warranty information go to www.Powr-Flite.com A Tacony Company 3101 Wichita Court • Ft. Worth, TX 76140-1755 1-800-880-2913 • Fax: 1-817-551-0719 • www.Powr-Flite.com...
Need help?
Do you have a question about the BP6 Series and is the answer not in the manual?
Questions and answers