Table of Contents
Advertisement
Tones and signals
Call volume
You can set the volume of the earpiece, handsfree function and headset on 5 levels inde-
pendently of each other.
Changes are only saved permanently in Profile Personal.
During a conversation
Handset Volume
In idle status
Handset Volume
Corded headset)
or
Audio Settings
setting is to apply for (Earpiece / Speaker / Corded headset)
Automatic volume control
(depending on the base)
Crescendo is not set for the ringtone volume (
The phone is able to automatically adjust the volume of the receiver and ringtone to the
ambient volume. Here you can set the sensitivity with which the phone reacts to changes in
noise level (Very High, High, Medium, Low, Very Low).
Audio Settings
Vol. / Smart Ringtone Vol.
Enable/disable:
Adjust the sensor:
Save:
Headset – volume correction
Change the call volume for the wired headset. In addition to the standard settings for the call
volumes, here you can compensate the audio setting characteristics of your headset.
Audio Settings
Save
select volume
select what the setting is to apply for (Earpiece / Speaker /
select the volume
Save . . . The setting is saved
OK
Handset Volume
OK
Smart Volume
Edit
Activation:
select On or Off
Sensitivity
Save
OK
Corded Hdst Boost
Availability and operation of the functions
may differ on your telephone.
Save . . . the setting is saved
OK
p. 54).
OK
adjust the sensor sensitivity
Setting the handset
select what the
set the volume
Save
Smart Earpiece
set the volume
53
Advertisement
Table of Contents
