Gigaset SL800 H PRO Manual page 48

Hide thumbs Also See for SL800 H PRO:
Table of Contents

Advertisement

Additional functions using the PC interface
Saving and restoring settings
Saving settings:
Save settings
select which data to save (images, melodies / settings / contacts, call lists)
(
= selected)
data selected is saved (file name extension: .hsdat)
Restore settings:
Save settings
Restore settings
data saved is loaded onto the handset
The message Data transfer in progress is shown on the display during data transfer between
the handset and PC. During this time, it is not possible to enter any data using the keypad and
incoming calls are ignored.
Carrying out a firmware update
Firmware updating is only possible via USB.
Update firmware . . . The current firmware version is shown
The update process may take up to 10 minutes (not including download time).
Do not interrupt the process and do not remove the USB data cable.
The data are first downloaded from the online update server. The time required for this depends
on Internet connection speed.
The display on your telephone is switched off, the Message key
Once the update is complete, your telephone will automatically restart.
The firmware can also be updated directly via the DECT radio link if the base/router
supports this (
48
Save settings
select a storage location in the file system
Select a backup file in the file system
Handset Update).
Availability and operation of the functions
may differ on your telephone.
OK . . . the
Open . . . the
Update
and the Talk key
flash.

Advertisement

Table of Contents
loading

Table of Contents