Advertisement

Quick Links

MODELS
WARNING – To reduce the risk of FIRE OR INJURY TO PERSON:
• Turn off/unplug the fixture and allow to cool before handling, making any adjustments/repairs, or replacing the
integrated light module.
• Integrated light module gets HOT quickly. Only touch the switch/plug when turning on.
• Do not touch the lens, guard, or enclosure when hot.
• Keep integrated light module away from materials that could ignite/ combust/ burn.
• Do not touch the integrated light module chip at any time. Use a soft cloth. The oils from skin could damage the LED.
• Install in accordance with all local codes and ordinances.
• Install all luminaires at least 10 feet (3.05 m) from a pool, spa, fountain, etc.
• A fixture shall not use tungsten halogen lamps unless the luminaire is marked for such lamps.

TRANSFORMER

• Install in accordance with all local codes and ordinances.
• Only use a UL1838 transformer for safety reasons and to ensure full lifespan of the fixture.
• Ensure that the transformer is plugged in to a GFCI protected circuit.
Lumien Lighting | Website:
INSTRUCTION MANUAL
(INTEGRATED LED)
WARNING – Risk of Electric Shock:

IMPORTANT

www.lumienlighting.com
W3B2
Wattage
3.5 Watts
Voltage
10-15V
Range
Lumen
240 Lumens
Output
Color Temp
2700K, 3000K
CRI
Lifespan
50,000 Hrs.
Finishes
Antique
Housing
Brass
Material
Wet Rated?
Light
Integrated LED
Source
| E-mail: orders@lumienlighting.com
80+
Yes

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W3B2 and is the answer not in the manual?

Questions and answers

Summary of Contents for LUMIEN W3B2

  • Page 1 • Install in accordance with all local codes and ordinances. • Only use a UL1838 transformer for safety reasons and to ensure full lifespan of the fixture. • Ensure that the transformer is plugged in to a GFCI protected circuit. Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com...
  • Page 2 • For maximum light output, adjust lighting circuits to provide between 10-15 volts. • Voltage can be regulated by adjusting circuit load/run. • To determine circuit voltage, use a digital voltmeter at the fixture. INSTALLATION Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com...
  • Page 3 Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com...

Table of Contents