Advertisement
ET1212H-S-MT
Hardened Microtype 10/100/1000Base-TX to 1000Base-SFP Ethernet Media Converter
• Supports external 1000Base-SFP
• Supports Auto MDI/MDIX
• Sleek Microtype design, fits within most camera housing
• Extensive LED indicators for network diagnostics
• -40°C to 75°C (-40°F to 167°F) operating temperature
Assembly, Startup, and Dismantling
Installation
• Installation: Mount the Micro-type unit onto a fixture, or camera housings, e.g. a plank, (either on the wall or on
a flat surface) with at least 2 screws piercing through the holes on the mounting frame to secure it in position.
• Startup: Connect the supply voltage to start up the Media Converter via the terminal block.
• Dismantling: Locate and remove the securing screws. Usually, but not limited to, at least 2 screws.
Manual Earth Green manual is available on our website
www.ot-systems.com.
3
V2.4
Advertisement
