Advertisement
ET1212H-S-MT
Hardened Microtype 10/100/1000Base-TX to 1000Base-SFP Ethernet Media Converter
Power Connection
12VDC
- +
The Port Status LEDs, dimension drawing for the Micro unit
LED
State
Green
PWR
Off
Green
FX SPEED
Off
Steady
FX LINK
Flashing
Yellow
SPD
Off
Steady
LINK/ACT
Flashing
Introduction to DIP switches (If with dip)
NO
Function
1
LFP function
2
ALS function (only for SFP)
3
FX Reset
4
FX Speed Set
LFP and ALS are started at the same time, LFP is valid, ALS does not work.
FX Reset: if enable, when FX link down, power will shut down, a few second and power up.
Functional Description
• Converts 10/100/1000Base-TX to 1000Base-SFP
• Supports Full/Half-duplex
-
GND
+
12V
Indication
Power on.
Power off.
1000Base-FX
100Base-FX
A valid network connection established
Transmitting or receiving data.
ACT Stands for Activity.
1000Base-TX
100Base-TX
A valid network connection established
Transmitting or receiving data.
ACT Stands for Activity.
Status
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Terminal Block
Description
Disable
Enable
Disable
Enable
Disable
Enable
FX 1000M
FX 100M/1000M
2
V2.4
Advertisement
